Ni/WS₂/WC Composite Nanosheets as an Efficient Catalyst for Photoelectrochemical Hydrogen Peroxide Sensing and...

It is highly attractive to develop a photoelectrochemical (PEC) sensing platform based on a non-noble-metal nano array architecture. In this paper, a PEC hydrogen peroxide (H₂O₂) biosensor based on Ni/WS₂/WC heterostructures was synthesized by a facile hydrothermal synthesis method and melamine carbonization process. The morphology, structural and composition and light absorption properties of the Ni/WS₂/WC catalyst were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometer. The average size of the Ni/WS₂/WC nanosheets was about 200 nm. Additionally, the electrochemical properties toward H₂O₂ were studied using an electrochemical workstation. Benefiting from the Ni and C atoms, the optimized Ni/WS₂/WC catalyst showed superior H₂O₂ sensing performance and a large photocurrent response. It was found that the detection sensitivity of the Ni/WS₂/WC catalyst was 25.7 μA/cm²/mM, and the detection limit was 0.3 mmol/L in the linear range of 1-10 mM. Simultaneously, the synthesized Ni/WS₂/WC electrode displayed excellent electrocatalytic properties in hydrogen evolution reaction (HER), with a relatively small overpotential of 126 mV at 10 mA/cm² in 0.5 M H₂SO₄. This novel Ni/WS₂/WC electrode may provide new insights into preparing other efficient hybrid photoelectrodes for PEC applications.