Accurate Temperature Reconstruction in Radiofrequency Ablation for Atherosclerotic Plaques Based on Inverse Heat...

Radio frequency ablation has emerged as a widely accepted treatment for atherosclerotic plaques. However, monitoring the temperature field distribution in the blood vessel wall during this procedure presents challenges. This limitation increases the risk of endothelial cell damage and inflammatory responses, potentially leading to lumen restenosis. The aim of this study is to accurately reconstruct the transient temperature distribution by solving a stochastic heat transfer model with uncertain parameters using an inverse heat transfer algorithm and temperature measurement data. The nonlinear least squares optimization method, Levenberg-Marquardt (LM), was employed to solve the inverse heat transfer problem for parameter estimation. Then, to improve the convergence of the algorithm and reduce the computational resources, a method of parameter sensitivity analysis was proposed to select parameters mainly affecting the temperature field. Furthermore, the robustness and accuracy of the algorithm were verified by introducing random noise to the temperature measurements. Despite the high level of temperature measurement noise (ξ = 5%) and larger initial guess deviation, the parameter estimation results remained closely aligned with the actual values, with an overall ERMS consistently below 0.05. The absolute errors between the reconstruction temperature at the measurement points TC1, TC2, and TC3, and the actual temperature, remained within 0.33 °C, 2.4 °C, and 1.17 °C, respectively. The Levenberg-Marquardt algorithm employed in this study proficiently tackled the ill-posed issue of inversion process and obtained a strong consistency between the reconstructed temperature the actual temperature.