Related Experiment Video
Updated: Jun 29, 2025

Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Analysis of strength failure in gangue-based cementitious backfill body from a microscopic perspective
Hao Wang1, Qi Wang1, Tongwen Gao2
1School of Civil Engineering, Zhengzhou University of Technology, Zhengzhou, Henan, China.
Abstract:
Backfill mining is an effective way to solve environment pollute, surface subsidence, and groundwater system damage which caused by coal mining. However, the complex underground environment may change the physical and mechanical properties of the backfill body, which poses a risk of strength failure. This paper analyzed the failure of gangue-based cemented backfill body which made up of gangue and fly ash. The results show that physicochemical reactions will generate quartz, kaolinite, and other high-strength substances; hydration reaction between the fine particles will generate hydrocalcium silicate and other C-S-H gels, they wrapped gangues as a whole, which provide a high strength of the cemented backfill body. Several experiments were carried out in order to find the reason for failure in samples under loads. The conclusion drawn as following: (1) When the load is large, the cracks extend from the surface of the samples to the interior, at the same time, the length and width of the cracks increasing obviously and connecting as net. Especially the external load exceeds the peak intensity. (2) The relationship between sample failure and pores is weak, but obvious with crack development, especially the cracks connected as a net. (3) The interface structure formed by gangue is an important source of crack development and, thus, will stimulate the development of cracks.
More Related Videos
11:07Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
09:00Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography
Published on: September 29, 2019
Related Concept Videos
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Microcracking in Concrete
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...
Bonding and Strength of Aggregate
Porosity in Cement Paste
The balance of water to cement in the mix is...
Pore Size Distribution
Adequate...