Optimization of AlGaN-based deep ultraviolet light emitting diodes with superlattice step doped electron blocking...

The superlattice electron blocking layer (EBL) has been proposed to reduce the electron leakage of the deep ultraviolet light emitting diodes (DUV-LEDs). However, the hole transport is hindered by the barriers of EBL and the improvement of hole injection efficiency still suffers enormous challenges. The superlattice step doped (SLSD) EBL is proposed to improve the hole injection efficiency while enhancing the electron confinement capability. The SLSD EBL enhances the electron confinement capability by multi-reflection effects on the electron wave function. And a built-in electric field towards the active region is generated by superlattice step doping, which facilitates the transport of holes into the multiple quantum wells. The Advaced Physical Model of Semiconductor Devices (APSYS) software is used to simulate the DUV-LEDs with conventional EBL, superlattice EBL, superlattice doped EBL, and SLSD EBL. The results indicate that the SLSD EBL contributes to the increased electron concentration in the multiple quantum wells, the reduced electron leakage in the p-type region, the increased hole injection current, and the increased radiative recombination rate. When the current is 60 mA, the external quantum efficiency of DUV-LED with SLSD EBL is increased to 5.27% and the output power is increased to 13.81 mW. The SLSD EBL provides a valuable reference for solving the problems of serious electron leakage and insufficient hole injection of the DUV-LEDs.