Related Experiment Video
Updated: Jun 28, 2025
Proton Therapy Delivery and Its Clinical Application in Select Solid Tumor Malignancies
Published on: February 6, 2019
[Research on Position Verification of Multi-Leaf Collimator (MLC) and Dose Verification Based on Electronic Portal
Jianfeng Sui1,2,3, Jiawei Sun1,2,3, Kai Xie1,2,3
1Radiotherapy Department, Changzhou No.2 People's Hospital, Affiliated Hospital of Nanjing Medical University, Changzhou, 213161.
Objective:
A quality control (QC) system based on the electronic portal imaging device (EPID) system was used to realize the Multi-Leaf Collimator (MLC) position verification and dose verification functions on Primus and VenusX accelerators.
Methods:
The MLC positions were calculated by the maximum gradient method of gray values to evaluate the deviation. The dose of images acquired by EPID were reconstructed using the algorithm combining dose calibration and dose calculation. The dose data obtained by EPID and two-dimensional matrix (MapCheck/PTW) were compared with the dose calculated by Pinnacle/TiGRT TPS for passing rate analysis.
Results:
The position error of VenusX MLC was less than 1 mm. The position error of Primus MLC was significantly reduced after being recalibrated under the instructions of EPID. For the dose reconstructed by EPID, the average passing rates of Primus were 98.86% and 91.39% under the criteria of 3%/3 mm, 10% threshold and 2%/2 mm, 10% threshold, respectively. The average passing rates of VenusX were 98.49% and 91.11%, respectively.
Conclusion:
The EPID-based accelerator quality control system can improve the efficiency of accelerator quality control and reduce the workload of physicists.
