Influence of Mg substitution on structural, magnetic and electrical properties of Zn-Cu ferrites

Studies on Mg substituted Zn-Cu ferrites with chemical formula of Zn_0.6Cu_0.4-xMg_xFe₂O₄ were synthesized by solid-state reaction technique. The structural phase of all the samples is characterized by XRD, show single phased cubic spinel structure. Density of the samples increases with the increase of Mg quantity. Average grain diameter decreases with increasing Mg content. All samples show soft ferromagnetic behavior as confirmed from the M-H hysteresis loop obtained from the VSM analysis. Thesaturation magnetization decreases with increasing Mg quantity. Increasing and decreasing trend of coercivity with the increase of Mg quantityis observed, which led to the slightly hard magnetic phase. The high frequencies create more effective for the ferrite grains of advanced conductivity and minor dielectric constant for all the samples but the AC electrical resistivity and dielectric constant are initiate to be more operational at lower frequencies. The variation of resistivity, dielectric constant with the Mg concentration is completely related to the porosity and bulk density.