Related Experiment Video
Updated: Apr 8, 2026

Microfluidic Picoliter Bioreactor for Microbial Single-cell Analysis: Fabrication, System Setup, and Operation
Published on: December 6, 2013
Spatial monitoring of hydrolysis in a plug-flow bioreactor: a support for flexible operation?
Theresa Menzel1, Peter Neubauer1, Stefan Junne2,3
1Chair of Bioprocess Engineering, Institute of Biotechnology, Technische Universität Berlin, Ackerstraße 76, ACK 24, 13355, Berlin, Germany.
Abstract:
Hydrolysis at changing hydraulic retention time, recirculation, bedding straw content in the feed, bioaugmentation and the impact of those changes on gradient formation in the liquid phase in plug-flow reactors (PFRs) was examined. The pH-value, conductivity and oxidation-reduction potential (ORP) were monitored at three spots along the PFRs to study potential correlations to process performance during a total process time of 123 weeks. The on-line monitoring showed good correlations to acidogenesis: namely, the pH and ORP to the acidification, to butyric (and lactic) acid concentration and to the acid yield. The ORP (measured at the inlet) showed the most stable correlation to acidogenesis under dynamic operation, while the conductivity (at the outlet) correlated to the acid concentration in dependence on the feedstock. Multiple measurement spots as used in this study allow to gain more information about acidogenic fermentation than a single spot, simplifying process control and automation attempts with recalcitrant feedstock.

