Prediction method for the tension force of support ropes in flexible rockfall barriers based on full-scale...

This paper proposes a prediction method for the tension force of support ropes in flexible rockfall barriers. The method is based on two full-scale model tests with an impact energy of 3000 kJ, as well as 36 set numerical models featuring varying lengths and impact energies. From the results of full scale tests and numerical models, it is inferred that the tension force at the end of the support rope is significantly less than that at the point of impact, exhibiting an approximate Gaussian attenuation distribution with propagation distance. To account for the attenuation of tensile forces in support ropes, a tensile attenuation coefficient is defined. Through comparative analysis of data obtained from 36 models with varying impact energies and propagation distances, the average attenuation coefficient for the upper support rope is determined to be approximately 0.7, while the average coefficient for the lower support rope is around 0.8. Utilizing the least squares method, a prediction method for the tension force of support ropes in flexible rockfall barriers is established. This method takes into account both the propagation distance and impact energy, enabling accurate predictions of the tensile behavior of the ropes under different conditions. This prediction model provides valuable insights for engineers in the design and optimization of these flexible barriers for rockfall mitigation.