Understanding the drying mechanism of straw substrate culture block: Physicochemical properties, pore structure, and...

As a new type of agricultural waste block substrate utilization, the initial wet base state of the substrate culture block needs to be dried. Therefore, studying the drying mechanism of substrate culture block is critical. In this study, the substrate culture block in a dry state was taken as the research object. Based on physical and chemical properties, the internal section of the substrate culture block was characterized by scanning electron microscopy and the pore condition of the particles was quantified. The results showed that the internal pore structure was uniform and favorable for plant root growth. Based on the pore structure, pore channel modeling was constructed to investigate the distribution of the internal multiphase medium and to distinguish between channels and pore-blind channels. The applicability of the modeling was verified and discussed. By measuring the drying rate of the substrate culture block and classifying its drying stages as fast speed, constant speed, and slow speed, it is clarified that the forms of moisture existence are bound-state water and free-state water, and the moisture migration is prioritized as surface adsorption water, interparticle water, particle attached water, and capillary water. Innovate a method to quantify the change of pore space in the drying process by pore coefficient ratio to evaluate the drying quality. The results show that when the pore coefficient ratio is about 40 %, its moisture content is 20 %∼30 %, and the drying effect is best at this time. The physical drying test further confirmed the correctness of the conclusion of the drying stage division and water loss law. This study can provide a theoretical reference for the modeling study of the pore structure of the block matrix and the exploration of its drying mechanism.