Properties of biopolymer blends based on Rugulopteryx okamurae and hydrophobic polycaprolactone (PCL) and hydrophilic...

The present study explored the utilization of Rugulopteryx okamurae (RO), an invasive brown seaweed, as a renewable raw material for plastic materials based on biopolymer blends. The goal of this study was to improve the previously observed poor mechanical properties of materials based on single biopolymer RO. To enhance these properties, two polymers with distinct hydrophobicities were incorporated into the formulation of different blends: hydrophobic polycaprolactone (PCL) and hydrophilic acylated soy protein isolate (SPIa). SPIa was derived from soy protein through a chemical modification process, introducing hydrophilic carboxyl groups. The addition of PCL significantly strengthened the blend, increasing the storage modulus (E'_1 Hz) from ~ 110 to ~ 250 MPa. Conversely, SPIa incorporation resulted in softening, with E' values around 40 MPa. Both additives enhanced deformability proportionally to their concentrations, with SPIa exhibiting notably higher deformability, reaching a maximum deformation of ~ 23% for a RO/SPIa ratio of 25/75. In summary, the study demonstrates the feasibility of producing environmentally friendly blend materials based on RO, tailored for specific applications by incorporating suitable additives into the formulation. Therefore, PCL is recommended for applications susceptible to moisture effects, such as packaging, while SPIa is suggested for highly absorbent applications such as personal care or horticulture.