Related Experiment Video
Updated: Jun 25, 2025

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
Adaptive fractional-order nonsingular terminal sliding mode control and sequential quadratic programming torque
Xingqi Hua1, Pak Kin Wong1, Jing Zhao1
1Department of Electromechanical Engineering, University of Macau, Taipa 999078, Macau SAR, China.
Abstract:
This paper proposes a novel sliding mode control (SMC) algorithm for direct yaw moment control of four-wheel independent drive electric vehicles (FWID-EVs). The algorithm integrates adaptive law theory, fractional-order theory, and nonsingular terminal sliding mode reaching law theory to reduce chattering, handle uncertainty, and avoid singularities in the SMC system. A sequential quadratic programming (SQP) method is also proposed to optimize the yaw moment distribution under actuator constraints. The performance of the proposed algorithm is evaluated by a hardware-in-the-loop test with two driving maneuvers and compared with two existing SMC-based schemes together with the cases with the change of vehicle parameters and disturbances. The results demonstrate that the proposed algorithm can eliminate chattering and achieve the best lateral stability as compared with the existing schemes.
More Related Videos
09:04A Modeling and Simulation Method for Preliminary Design of an Electro-Variable Displacement Pump
Published on: June 1, 2022
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Phase-lead and Phase-lag Controllers
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...