Advancement of Electro-Optical Properties through Changes in the Physicochemical Composition of Hybrid Thin Films by...

A hybrid thin film was fabricated by doping graphene oxide into a sol-gel solution containing a mixture of zirconium, bismuth, and indium oxide. The thin film was fabricated using a brush coating process. The graphene oxide doping ratios used were 0, 5, and 15 wt%. During the thin film fabrication process, the produced sol-gel solution generates a contractile force due to the shear stress of the brush bristles, resulting in a microgroove structure. This structure was confirmed through scanning electron microscopy analysis, which revealed the clear presence of rGO. Comparing the electrical properties of a zirconium bismuth indium oxide thin film without graphene oxide doping and a thin film doped with 15 wt% graphene oxide, the electro-optical properties were significantly improved with graphene oxide doping. In general, the threshold voltage decreased by approximately 0.42 V. In addition, bandgap measurements confirmed the improved conductivity characteristics with graphene oxide doping. Since this improvement in electro-optical properties is associated with the reduction process due to graphene oxide doping, X-ray photoelectron spectroscopy analysis was performed to assess the intensity change of each element. Based on these observations, hybrid thin films doped with graphene oxide emerge as promising candidates for next generation thin film.