Synthetic phantoms enable calibration between abattoir based dual energy X-ray absorptiometers used for prediction of...

Dual energy x-ray absorptiometry (DXA) devices were installed at two Australian abattoirs to predict computed tomography (CT) determined fat % and lean % of lamb carcasses. This study tested three algorithms developed for these devices, termed β1, β2 and β3, and assessed their accuracy and precision in predicting CT composition. Algorithm β3 included the use of a plastic phantom calibration block scanned by both DXA devices to adjust prediction equations, resulting in superior accuracy to the algorithms without phantom calibration (β1 and β2). When compared to the gold-standard CT composition, the bias of the DXA predictions was lowest when using algorithm β3 at the two sites (-1.17%, -0.49% for fat %, 0.11%, -0.37% for lean %). The difference of DXA composition predictions between sites was lowest when using algorithm β3, which demonstrated between site differences of 0.59 CT fat %, and 0.46 CT lean%. In contrast, algorithm β1 and β2 produced differences of 23.7% and 30.8% for CT fat, and 17.3% and 21.9% for CT lean between the two DXA devices. There was a small difference of 0.78% between the fat predictions of the first DXA image compared to the second DXA image for each carcass. The precision of predictions improved slightly using algorithm β3. This work demonstrates that the in-line DXA systems can produce comparable results across sites.