Related Experiment Video
Updated: Jun 25, 2025

Experimental Study of the Relationship Between Particle Size and Methane Sorption Capacity in Shale
Published on: August 2, 2018
Porosity and pore structure evolution during the weathering of black shale
Guoliang Xie1, Jie Sheng2, Jiayu Wang3
1School of Civil Engineering & Architecture, Tongling University, Tongling, Anhui 244000, China; State Key Laboratory of Oil and Gas Reservoir Geology and Exploration, Chengdu University of Technology, Chengdu 610059, China.
Abstract:
Pore type and pore structure evolves systematically across continuous black shale weathering profile. However, the extend and process of pore structure change is still an enigma. In this study, we try to unveil the pore structure evolution during weathering process through studying Cambrian Hetang shales in southern China. Fourteen shale samples, from protolith zone (PZ), fractured and weathered shale zone (FWZ), and saprolite zone (SZ), were collected to elucidate how porosity and pore structure develop during black shale weathering under subtropical condition. Through low pressure argon (Ar) gas adsorption (LP-ArGA), high pressure mercury intrusion (HPMI), nuclear magnetic resonance(NMR) and field emission scanning electron microscope (FESEM) observation, the results reveal significant differences in physical properties and pore structures among the PZ, FWZ, and SZ samples. Specifically, compared to PZ, FWZ and SZ samples are characterized by higher clay mineral content, lower organic matter (OM), and the absence of carbonates and pyrite. Total porosity, determined through HPMI and NMR, exhibits a gradual increase from PZ (6.70 % and 6.41 %) to FWZ (20.47 % and 13.45 %) and SZ (23.22 % and 12.48 %). Ar adsorption isotherms indicate a change in pore type from predominantly ink-bottle and slit-shaped in the PZ to mainly slit-shaped in FWZ and SZ. Integrated analysis of LP-ArGA, HPMI, NMR and SEM observation suggests a substantial decrease in the contribution of micropores to total pore volume (PV) and a concurrent increase in larger pores (meso-macropores) with the increase of weathering intensity. This results in smoother surfaces of micro-transition pores but rougher surfaces of macropores. Changes in mineralogy composition during weathering play a crucial role in influencing pore structure of shales and further accelerating the release and migration of toxic elements in black shale. Our study provides the essential theoretical foundation for the remediation of soil and water environmental pollution caused by black shale weathering.
More Related Videos
12:18Pore-scale Imaging and Characterization of Hydrocarbon Reservoir Rock Wettability at Subsurface Conditions Using X-ray Microtomography
Published on: October 21, 2018
08:38Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications
Published on: January 16, 2018
Related Concept Videos
Pore Size Distribution
Adequate...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Unsoundness of Aggregate due to Volume Change
Mortar Joint Deterioration in Masonry
The...
Permeability of Concrete