Stable interphase inducer based on montmorillonite clay mineral to enhance stability and fire safety for lithium...

Heat buildup from factors like mechanical, electrical, or thermal stress is the main safety issue in lithium metal batteries (LMBs). Even without such stressors, however, LMBs may remain fire-prone because of the development of unstable electrode-electrolyte interphase on charge-discharge, potentially leading to internal short circuits. In this study, a stable cathode-electrolyte interphase inducer (SCEI-I) is proposed to tackle both the cycling stability issue and safety concerns. SCEI-I is synthesized by incorporating montmorillonite, a clay mineral, and methylphosphonic acid dimethyl ester, a flame-retardant material, onto a porous polyethylene film. On cycling, SCEI-I can induce a thin (<8 nm), uniform and robust cathode-electrolyte interphase layer, contributing to a steady and high Coulombic efficiency of 99.6%-99.8% with decreased impedance. SCE-I improves electrochemical performance by reducing the capacity degradation from ∼21.9% to ∼8.9% after 100 cycles. SCE-I also demonstrates strong thermal stability as the endothermic energy of SCEI-I is only -32.4 J/g (24 °C-280 °C), which is less than one-third of that of polypropylene separator (-118.9 J/g). Furthermore, when exposed to fire, the SCEI-I membrane instantly extinguished flames by disrupting combustion chain reaction. The present study proposes an interfacial engineering approach to improve the stability and safety of LMBs.