Optimization of mechanical properties and dimensional stability of densified wood using response surface methodology

Wood has gained popularity as a building and decorative material due to its environmentally friendly and sustainable characteristics. Yet, its long maturation time poses a limitation on meeting the growing demand for wood products. This challenge has led to the plantation of fast-growing wood as an alternative solution. Unfortunately, the poor mechanical properties of fast-growing wood hinder its application. In this study, we developed novel densification-modified wood by combining alkali chemical pretreatment, cyclic impregnation, and mechanical hot-pressing techniques. Additionally, the response surface method was employed to rapidly determine the optimal preparation parameters, reducing the cost of preparation under various conditions. The optimized parameters resulted in densification-modified wood with a flexural strength and modulus of elasticity of 337.04 MPa and 27.43 GPa, respectively. Furthermore, the densified wood achieved excellent dimensional stability by reducing the water-absorbing thickness swelling to 1.15 % for 72-h water soaking. The findings indicated that the densification-modified wood possessed high tensile strength and elastic modulus, along with excellent dimensional stability. The proposed densified wood modification technology in this study offers new perspectives and design guidance for the application of outdoor engineering structures, energy-efficient buildings, and decorative materials.