Related Experiment Video
Updated: Jun 24, 2025

Image-based Lagrangian Particle Tracking in Bed-load Experiments
Published on: July 20, 2017
Undrained behavior of marine clay under one-way cyclic loading with variable confining pressure
1School of Resources and Civil Engineering, Suzhou University, Suzhou, 234000, People's Republic of China. leisun2015@163.com.
Abstract:
Settlement of roads or railway caused by traffic loading has a serious effect on the safety and service performance of transport infrastructures constructed on soft marine clay. While simple cyclic triaxial test with constant confining pressure (CCP) were used in most of the previous studies, a series of cyclic triaxial tests with variable confining pressure (VCP) were carried out on normally consolidated (NC) and overconsolidated (OC) reconstituted Wenzhou soft clay in this paper to study the undrained behavior of soft marine clay due to surcharge preloading as well as cyclic traffic loading. VCP test is able to approximate the complicated stress path than CCP test caused by traffic loading. The test results indicate that NC specimens show significantly different pore water pressure (u) evolution compared with OC specimens. However, a change in the overconsolidation ratio (OCR) of OC specimens does not have a significant influence on variation of u with identical cyclic stress ratio (CSR) and total stress path (η). The slope of the effective stress path is dependent on the total stress path under which the specimen was loaded cyclically, regardless of the OCR and whether variable confining pressure was applied. The slope of the effective stress path is broadly in line with the slope of corresponding total stress path. In addition, the development of permanent axial strain (εpa) due to one-way cyclic loading was shown to depend significantly on the values of η and OCR. Both the variable confining pressure and OCR limited the strain accumulation of saturated marine clay under undrained one-way cyclic loading. Finally, the effects of η and OCR on the magnitude of εpa after 1000 loading cycles are quantified and incorporated in a power law function for the permanent deformation prediction of soft marine clay due to traffic loading.
Related Concept Videos
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Plastic Behavior
Creep in Concrete
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Fluid Pressure over Curved Plate of Constant Width
Porosity in Cement Paste
The balance of water to cement in the mix is...

