Fabrication and performance evaluation of a design for an extended depth-of-focus intraocular lens based on an
Yuwei Xing1, Yongji Liu1,2, Kunqi Li1
1Tianjin Key Laboratory of Micro-scale Optical Information Science and Technology, Institute of Modern Optics, Nankai University, Tianjin 300350, China Nankai University, Tianjin 300350, China.
Abstract:
This study presents the fabrication and evaluation of a sinusoidal extended depth-of-focus (EDoF) intraocular lens (IOL) based on our previously proposed design approach. The power, through-focus MTF, and surface profile were measured using commercial instruments. Through-focus images of a United States Air Force (USAF) 1951 resolution target formed by the fabricated IOL were compared with Symfony and AR40E under monochromatic and polychromatic light using optical bench testing. Simulations assessed visual acuity (VA) of a pseudophakic model eye with the EDoF IOL, including evaluation of tilt and decentration effects. Results indicate that the base power, add power, and the through-focus MTF@50 lp/mm of the fabricated IOL at a 3 mm pupil size align with the design specifications. The extended-depth-of-focus and imaging performance for the far vision of the fabricated IOL under both monochromatic and polychromatic light conditions at a 3.0 mm pupil diameter is comparable to that of Symfony. In addition, the fabricated IOL exhibits a similar extended-depth-of-focus for three discrete wavelengths. The pseudophakic model eye with the designed EDoF IOL demonstrates a VA exceeding 0.1 logMAR within a defocus range of 2.44 D. The VA is tolerant to both IOL tilt and decentration. These findings demonstrate the promising potential of the sinusoidal EDoF IOL design for future applications in cataract surgery.
