Dynamic response and deformation failure microscopic characteristics of cyclic impact-cemented tailing backfill

Frequent blasting disruptions can lead to cumulative damage within the cemented tailing backfill (CTB), increasing the risks associated with mining operations and reducing the recovery rate of the pillar. To address this issue, the Split Hopkinson Pressure Bar (SHPB) was utilized to conduct cyclic impact tests on CTB containing various cement tailing ratios (CTR) at different curing ages. The tests analyzed the stress-strain curve law, dynamic compressive strength (DCS), dynamic strength increase factor (DIF), absorption energy, and deformation failure characteristics of CTB under different impact velocities. Additionally, nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM) were employed to investigate the internal pore structural properties of CTB. The research findings indicate that (1) Average strain rate exhibits a linear relationship with the DCS and impact velocity. A lower number of impacts occurred at higher impact velocities and shorter curing age. The number of impacts was drastically reduced when the impact velocity surpassed 3 m/s. As the CTR increased, the number of impacts also increased. When the number of impacts increased, the elastic modulus, dynamic impact strength, and peak strain initially increased before ultimately decreasing. (2) Under the cyclic impact load, the shear failure and axial splitting failure were the main failure modes of CTB. Increasing the CTR may be a more effective strategy for reducing the degree of CTB fragmentation compared to prolonging the curing age. When the impact velocity is lower than 3 m/s, CTB can withstand multiple impacts and maintain high levels of integrity. When the DIF of the first shock is below 1.5, the CTB demonstrates a capability to withstand more than four shocks. If the DIF exceeds 2, the CTB can only endure a single shock. (3) NMR and SEM observations revealed that CTB itself contains more pores. A dense network structure will grow inside CTB as the curing age and CTR are increased, reducing the porosity. The pore size observed in the samples also support that increasing CTR may be a more effective strategy. Our findings contribute to a better understanding of the kinetic response of CTB in deep mines under frequent blasting disruption and offer a valuable reference point for future research in this area.