Analysis of stage parameters of low-temperature oxidation of water-soaked coal based on kinetic principles

Mine fires caused by spontaneous coal combustion are major disasters in coal mines. The staged oxidation kinetic parameters of various coal samples at oxygen concentrations of 21 %, 15 %, 10 %, 5 %, and 3 % were analyzed using a programmed temperature testing system. Herein, the temperature increase rate of coal, the temperature difference between the furnace and coal, and the oxygen consumption characteristics were obtained. Based on the amount of CO produced and the temperature sensitivity coefficient, three characteristic temperatures and four stages of low-temperature oxidation (LTO) were identified. The results showed that at a critical temperature (T_C), the amount of CO gas released from the coal samples increased with increasing oxygen concentration, and the difference in the oxygen consumption rate increased. After the limit temperature (T_u), the amount of CO gas increased steadily, and the increase in the oxygen consumption rate stagnated. CO production, the maximum heating rate, and the maximum heat release rate were positively correlated with the oxygen concentration. As the oxygen concentration increased, the activation energy during the oxygen absorption stage gradually decreased. The average reaction enthalpy (ΔH) of pre-oxidized water-immersed coal was 19.37 kJ/kg greater than that of raw coal. The equation for the conservation of energy of the coal oxidation warming process was normalized. The theoretical values of the awakening stage and the stable stage were τν and τν (1-B), respectively. When B was >1, pre-oxidized water-immersed coal at a low oxygen concentration was prone to crossover points during the oxygen absorption stage, which increased the risk of coal spontaneous combustion (CSC). The research results could provide a theoretical basis for the staged control of the spontaneous combustion of water-immersed coal in goaf areas.