An Integrated Method for Microwave Absorption and External Thermal Flow Simulation in SAR Antenna Vacuum Thermal...

The simulation of microwave absorption and external thermal flow is an essential aspect of the vacuum thermal testing process for Synthetic Aperture Radar (SAR) antenna. This paper proposes a novel integrated method for simulating microwave absorption and external thermal flow, specifically designed for vacuum thermal testing. The method employs a non-woven fabric square pyramid assembly as the primary structure to establish a low electromagnetic scattering environment. External heat flow simulation is achieved by arranging carbon fiber heating wires between square cones. Through numerical analysis and experimental tests, the influence of the position of the carbon fiber heating wire on the uniformity of heat flow and reflectivity was revealed. A prototype system is developed based on these findings. The external thermal flow is adjustable in the range of 80-550 W/m², with a uniformity better than 5%. The reflectivity in the L to X microwave frequency band is basically better than -25 dB, and in local frequency bands, it is better than -30 dB. The system has been successfully applied in SAR antenna component and satellite vacuum thermal tests, meeting all ground simulation test requirements and exhibiting significant potential for widespread application.