Related Experiment Video
Updated: Jun 22, 2025

High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia YSZ Scaffolds by In Situ Carbon Templating Xerogels
Published on: April 16, 2017
Significant Improvement in Thermoelectric Properties of Carbon-Reinforced Cementitious Composites Achieved by
Jian Wei1, Lihang Sheng1, Enhao Lv1
1College of Materials Science and Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
Abstract:
Building structures are exposed to direct sunlight for a long time, accumulating a large amount of low-grade thermal energy, which aggravates environmental pollution and energy consumption. Thermoelectric cement-based composites can realize the interconversion of thermal and electrical energy, showing great potential benefits in large-scale heat collection and energy conversion. Although a lot of exploration and research has been carried out on the thermoelectric properties of cement-based composites reinforced with carbon materials, the contribution of the characteristics of carbon materials, such as the graphitization degree, to the thermoelectric properties of cement-based composites is still unclear. In this article, the graphitization degree of expanded graphite (EG) was modulated by etching EG with an acid solution. The low graphitization degree improves the effective mass of carriers and aggravates the electron and phonon scattering at the interface of EG/cement-based composites. Low thermal conductivity was obtained while increasing the Seebeck coefficient of EG/cement-based composites. The power factor (17.1 μW m-1 K-2) and thermoelectric figure of merit (2.95 × 10-3) of the sample are increased by 18.6 times and 44.2 times, respectively, achieving the highest thermoelectric performance in cement-based composites reinforced with carbon materials. This study provides a direction for improving the thermoelectric properties of cement-based composites by structural regulation of carbon materials.
Related Concept Videos
Hydration of Cement
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Mass Concreting
To reduce the risk of such cracking, the concrete mix may incorporate low-heat cement and pozzolans to reduce the temperature rise. Pre-cooled angular aggregates and water-reducing admixtures...
Hot Weather Concreting
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
Cold Weather Concreting
To counteract the negative impacts of cold weather, ensuring...
Carbonation Shrinkage
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction...

