Energy Absorption and Failure Modes of Different Composite Open-Section Crush Elements under Axial Crushing Loading

In order to study the energy absorption characteristics of the open-section thin-walled composite structures with different cross-sections, axial compression tests were carried out at loading speeds of 0.01 m/s, 0.1 m/s, and 1 m/s. Finite element models were built to predict the crushing response and energy absorption behaviors of these open-section structures. The effects of the cross-section's shape, cross-section aspect ratio, trigger mechanism, and loading speed on the energy absorption characteristics of the composite structures were analyzed. The results show that the average crushing loads of the hat-shaped and Ω-shaped open-section structures are 14.1% and 14.6% higher than those of C-shaped open-section structures, and the specific energy absorption (SEA) values are 14.3% and 14.8% higher than that of C-shaped open-section structures, respectively. For the C-shaped open-section structures, a 45° chamfer trigger is more effective in reducing the initial peak load, while a 15° steeple trigger is more appropriate for the hat-shaped open-section structures. The average crushing loads and SEA of C-shaped, hat-shaped, and Ω-shaped open-section structures are reduced when the loading speed is increased from 0.01 m/s to 1 m/s. The increase in loading speed leads to the splashing of debris and thus reduces the loading area and material utilization of open-section structures, leading to a decrease in energy absorption efficiency.