One-Step Synthesis of Graphene-Covered Silver Nanowires with Enhanced Stability for Heating and Strain Sensing

Solution-processed silver nanowire (AgNW) networks have been considered as promising electrode candidates for next-generation electronic devices. However, they suffer from poor thermal and electrical stability and low mechanical properties, hindering their practical applications. In this work, graphene nanosheets are successfully introduced into AgNW via a facile one-step solvothermal process. Benefiting from increased conductive paths, the resultant AgNW/graphene films exhibit high electrical conductivity. More importantly, the interlocking NW morphology can be maintained under high temperature and applied voltage due to suppressed Ag migration, which is enabled by the introduction of graphene. This feature leads to enhanced thermal and electrical stability, making them suitable for use as transparent heaters. Furthermore, the composite films present excellent mechanical performance, and negligible resistance change is observed after 10 000 repeated bending cycles. To demonstrate their feasibility toward sensor applications, sandwiched strain sensors are designed, which can endure larger tensile strains and show higher sensitivity and repeatability compared with pure AgNW-based device. Furthermore, various hand gestures can be easily recognized by the resultant sensors based on unique combinations of sensing response. This work not only provides a low-cost method to realize large-scale synthesis of AgNW/graphene composites but also offers guidance to prepare high-performance electrodes for advanced electronics.