Fluorinated Naphthalene Diimides as Buried Electron Transport Materials Achieve Over 23% Efficient Perovskite Solar...

Naphthalene diimides (NDI) are widely serving as the skeleton to construct electron transport materials (ETMs) for optoelectronic devices. However, most of the reported NDI-based ETMs suffer from poor interfaces with the perovskite which deteriorates the carrier extraction and device stability. Here, a representative design concept for editing the peripheral groups of NDI molecules to achieve multifunctional properties is introduced. The resulting molecule 2,7-bis(2,2,3,3,4,4,4-heptafluorobutyl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone (NDI-C4F) incorporated with hydrophobic fluorine units contributes to the prevention of excessive molecular aggregation, the improvement of surface wettability and the formation of strong chemical coordination with perovskite precursors. All these features favor retarding the perovskite crystallization and achieving superior buried interfaces, which subsequently promote charge collection and improve the structural compatibility between perovskite and ETMs. The corresponding PSCs based on low-temperature processed NDI-C4F yield a record efficiency of 23.21%, which is the highest reported value for organic ETMs in n-i-p PSCs. More encouragingly, the unencapsulated devices with NDI-C4F demonstrate extraordinary stability by retaining over 90% of their initial PCEs after 2600 h in air. This work provides an alternative molecular strategy to engineer the buried interfaces and can trigger further development of organic ETMs toward reliable PSCs.