Optimizing the Tensile Strength of Weld Lines in Glass Fiber Composite Injection Molding

Weld line defects, commonly occurring during the plastic product manufacturing process, are caused by the merging of two opposing streams of molten plastic. The presence of weld lines harms the product's aesthetic appeal and durability. This study uses artificial neural networks to forecast the ultimate tensile strength of a PA6 composite incorporating 30% glass fibers (GFs). Data were collected from tensile strength tests and the technical parameters of injection molding. The packing pressure factor is the one that significantly affects the tensile strength value. The melt temperature has a significant impact on the product's strength as well. In contrast, the filling time factor has less impact than other factors. According to the scanning electron microscope result, the smooth fracture surface indicates the weld line area's high brittleness. Fiber bridging across the weld line area is evident in numerous fractured GF pieces on the fracture surface, which enhances this area. Tensile strength values vary based on the injection parameters, from 65.51 MPa to 73.19 MPa. In addition, the experimental data comprise the outcomes of the artificial neural networks (ANNs), with the maximum relative variation being only 4.63%. The results could improve the PA6 reinforced with 30% GF injection molding procedure with weld lines. In further research, mold temperature improvement should be considered an exemplary method for enhancing the weld line strength.