Design, Fabrication, and Dynamic Analysis of a MEMS Ring Resonator Supported by Twin Circular Curve Beams

In this paper, we present a compressive study on the design and development of a MEMS ring resonator and its dynamic behavior under electrostatic force when supported by twin circular curve beams. Finite element analysis (FEA)-based modeling techniques are used to simulate and refine the resonator geometry and transduction. In proper FEA or analytical modeling, the explicit description and accurate values of the effective mass and stiffness of the resonator structure are needed. Therefore, here we outlined an analytical model approach to calculate those values using the first principles of kinetic and potential energy analyses. The natural frequencies of the structure were then calculated using those parameters and compared with those that were simulated using the FEA tool ANSYS. Dynamic analysis was performed to calculate the pull-in voltage, shift of resonance frequency, and harmonic analyses of the ring to understand how the ring resonator is affected by the applied voltage. Additional analysis was performed for different orientations of silicon and assessing the frequency response and frequency shifts. The prototype was fabricated using the standard silicon-on-insulator (SOI)-based MEMS fabrication process and the experimental results for resonances showed good agreement with the developed model approach. The model approach presented in this paper can be used to provide valuable insights for the optimization of MEMS resonators for various operating conditions.