Related Experiment Video
Updated: Jun 17, 2025

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
Published on: November 28, 2017
Direct Solution Deposition of Large-Area Non-Solvated Fullerene Single-Crystal Films for High-Performance n-Type
Yujie Zhao1, Qiuyue Sheng1, Shifeng Ke1
1MOE Key Laboratory of Macromolecular Synthesis and Functionalization, International Research Center for X Polymers, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China.
Abstract:
Fullerene (C60) crystals have attracted considerable attention in the field of optoelectronic devices owing to their excellent performance as n-type semiconductor material. However, a challenge still remains unbeaten as to the continuous crystallization of non-solvated C60 single-crystal films with high coverage and uniform alignment using low-cost solution techniques. Here, a facile bar coating method is used to prepare ribbon-shaped non-solvated C60 crystals with a large area (up to centimeters) and high coverage (>95%) by precisely controlling the crystallization process from specific solvents. Benefiting from the non-solvated crystalline structure, well-distributed thickness, uniform morphological alignment, and crystallographic orientation, organic field-effect transistors fabricated from the C60 single-crystal films exhibit a high average electron mobility of 2.28 cm2 V-1s-1, along with the coefficient of variance (CV) as small as 13.6%. This efficient manufacturing method will lay a strong foundation for C60 single-crystal films to fit into the future high-performance integrated optoelectronic application.

