Surgeons Who Perform Total Hip Arthroplasty Are at Risk for Noise-Induced Hearing Loss, Especially When Using...

Noise-induced hearing loss (NIHL) is a serious concern for orthopedic surgeons. The National Institute for Occupational Safety and Health (NIOSH) sets the safe exposure limit at 85 dB for 8 hours, yet operating rooms often surpass this limit. This study investigated if using an automated broaching system exposes orthopedic surgeons to dangerous decibel (dB) levels.

A prospective study analyzed 138 intraoperative sound recordings from 92 total hip arthroplasty (THA) surgeries and 46 baseline measurements at an academic-affiliated private practice, using the NIOSH Sound Level Meter (SLM) application and a microphone. The surgeries were categorized into manual and automated broaching. Key metrics measured included maximal dB level (MDL), peak sound pressure (LC_peak), average continuous sound (LA_eq), and average weighted sound in an 8-hour period (TWA), along with dose representations, to identify hazardous noise levels.

Of the 92 THA sound recordings, 50 used manual broaching and 42 employed automated broaching. Automated broaching exhibited higher noise levels, with an average MDL of 109.92 dBA, a LA_eq of 86.09 dBA, a TWA of 76.48 dBA, and a projected noise dose of 137.74%. In contrast, manual broaching exhibited an average MDL of 105.87 dBA, a LA_eq of 83.06 dBA, a TWA of 72.82 dBA, and a projected noise dose of 82.02%.

This study highlights the auditory risks from automated broach and manual THA surgeries that orthopedic surgeons experience. Manufacturers should focus on reducing instrument noise when designing surgical tools and orthopedic surgeons and operating room staff should take measures to protect themselves from NIHL during surgery. [Orthopedics. 2024;47(6):349-354.].