Related Experiment Video
Updated: Jun 14, 2026

Closed-loop Neuro-robotic Experiments to Test Computational Properties of Neuronal Networks
Published on: March 2, 2015
Event-triggered adaptive neural prescribed performance admittance control for constrained robotic systems without
Penghui Fan1, Jinzhu Peng2, Hongshan Yu3
1School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou 450001, China.
Abstract:
In this paper, an event-triggered adaptive neural prescribed performance admittance control (ETANPPAC) scheme is proposed to control the constrained robotic systems without velocity sensors. To ensure compliance during human-robot interaction, the reference trajectory is obtained by reshaping the desired trajectory for the robotic systems based on the admittance relationship, where a saturation function is used to constrain the reference trajectory, avoiding excessive contact forces that could render the trajectory inexecutable. Moreover, a barrier Lyapunov function is used to constrain the tracking errors for prescribed performance, where a velocity observer and a radial basis function neural network are designed to estimate the velocity and the uncertainty of the robotic systems, respectively, to enhance control performance. To reduce the communication burden, an event-triggered mechanism is introduced and the Zeno behavior is avoided with the event-triggered condition. The stability of the whole control scheme is analyzed by the Lyapunov function. Simulation and experimental tests demonstrate that the proposed ETANPPAC scheme can track the desired trajectory well under constraints and reduce the communication burden, thereby achieving better efficiency for controlling the robotic systems compared with similar control schemes.
Related Concept Videos
One-Degree-of-Freedom System
A one-degree-of-freedom system is defined by an independent variable that determines its state and behavior. One example of a one-degree-of-freedom system is a simple harmonic oscillator, such as a...
Control Systems
At the heart...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...

