Comparison of MCNP and Microshield Dose Savings Determinations for Remote Methods of Transuranic Contamination...

The maturation of robotic and remote systems presents opportunities to expand the use of technologies that have typically been restricted to high-dose/high-risk nuclear work for moderate- or low-risk work to further reduce radiation exposure to workers. This study quantifies the potential dose savings achieved through the use of robotic techniques for characterizing transuranic-contaminated waste items and compares dose estimates from a simplistic, user-friendly deterministic radiation transport code and a more robust, complex Monte Carlo code. Three scenarios of transuranic-contaminated waste items described in published reports are modeled using representative source geometries in MicroShield and MCNP radiation transport codes. Estimated dose rates are determined at points ranging from 30 cm to 300 cm from the face of the waste item to represent the increase in distance allowed by robotic or remote system implementation for characterization activities. The dose rate savings are then converted to detriment cost savings using a dollar-per-person-dose conversion factor to provide a financial context. The radiation transport simulations show no consistent bias in estimated dose rate by varying simulation methodology or using geometrical simplifications-in some cases, MicroShield produces higher dose rate estimates while MCNP estimates are higher in other cases. In the MCNP simulations, the volume source geometry consistently produces a higher dose rate than the slab source geometry, but the MicroShield dose rate estimates do not display the same trend. Dose savings range from 1.60 × 10-5 μSv h-1 to 1.75 × 101 μSv h-1 with associated detriment cost savings from < 0.010 USD/person-h to 14 USD/person-h.