Primary Stability of Kyphoplasty in Incomplete Vertebral Body Burst Fractures in Osteoporosis: A Biomechanical...

Background: The objective of our study was to biomechanically evaluate the use of kyphoplasty to stabilize post-traumatic segmental instability in incomplete burst fractures of the vertebrae. Methods: The study was performed on 14 osteoporotic spine postmortem samples (Th11-L3). First, acquisition of the native multisegmental kinematics in our robot-based spine tester with three-dimensional motion analysis was set as a baseline for each sample. Then, an incomplete burst fracture was generated in the vertebral body L1 with renewed kinematic testing. After subsequent kyphoplasty was performed on the fractured vertebral body, primary stability was examined again. Results: Initially, a significant increase in the range of motion after incomplete burst fracture generation in all three directions of motion (extension-flexion, lateral tilt, axial rotation) was detected as proof of post-traumatic instability. There were no significant changes to the native state in the adjacent segments. Radiologically, a significant loss of height in the fractured vertebral body was also shown. Traumatic instability was significantly reduced by kyphoplasty. However, native kinematics were not restored. Conclusions: Although post-traumatic segmental instability was significantly reduced by kyphoplasty in our in vitro model, native kinematics could not be reconstructed, and significant instability remained.