The Effect of Artificial Ageing on the Changes in Selected Properties of Organic Coated Sheets

This contribution presents the results of research focused on changes in selected properties of organic-coated steel sheets in a corrosive environment of salt mist. The aim of this study was to characterise coated sheets and to analyse the influence of elevated temperature on changes in their selected properties. The methodology and experiments were chosen to simulate the accelerated ageing and to evaluate the surface of organic-coated steel sheets. During the research, the effect of artificial ageing due to increased temperature on changes in mechanical properties of coated sheets was monitored, which were determined by tensile testing according to STN EN 10002-1. The fracture surface of the test samples was analysed using a SEM. The following observations were made for the evaluation of coating by cross-cut tests according to EN ISO 2409. Corrosion tests were carried out by conducting salt spray corrosion tests according to EN ISO 9227. The test specimens were artificially sectioned using a laser beam. The results of the research experiments confirmed the assumption that the utilisation of the laser beam was convenient for the creation cross-cut test of the material. After the ageing test, only small significant changes in the basic mechanical properties of the tested materials were observed. It is necessary to take into account that there were changes in the appearance of the coating. The cross-cut test confirmed the results that the plastic-coated sheets could be utilised in salt corrosion environments.