Effects of Thermoforming Parameters on Woven Carbon Fiber Thermoplastic Composites

The quality of woven carbon fiber fabric/polycarbonate thermoplastic composites after thermoforming and demolding was investigated using finite element simulation and the Taguchi orthogonal array. The simulation utilized a discrete approach with a micro-mechanical model to describe the deformation of woven carbon fabric, combined with a resin model. This simulation was validated with bias extension tests at five temperatures. The thermoforming process parameters considered were blank temperature, mold temperature, and blank holding pressure, with three levels for each factor. Optimal values for the fiber-enclosed angle, spring-back angle, mold shape fitness, and the strain of the U-shaped workpiece were desired. The results indicated that the comparison of the stress-displacement curve of bias extension tests verified the application of the discrete finite element method. Results from the Taguchi array indicated that blank holding pressure was the dominant parameter, with the optimal value being 1.18 kPa. Blank temperature was the second most significant factor, effective in the range of 160 °C to 230 °C, while mold temperature had a minor effect. Furthermore, the four quality values are dependent and have a similar trend. The best combination was identified as a blank holding press of 1.18 kPa, a blank temperature of 230 °C, and a mold temperature of 190 °C.