Series/Parallel Switching for Increasing Power Extraction from Thermoelectric Power Generators

We propose a method for increasing power extraction from a thermoelectric generator (TEG) by switching between series/parallel circuit configurations of thermoelectric elements, which can adjust the internal impedance of the TEG. The power characteristics of the TEG can be adjusted to the load characteristics of the connected device and the relevant ambient temperature. In this paper, we analyzed the change in the TEG characteristics with the series/parallel switching function. We evaluated the power supply to the connected devices at different ambient temperatures and different series/parallel configurations and confirmed that the extracted power could be increased. By theoretically analyzing the circuit configuration of the thermoelectric devices, the switching required to improve the power extraction, and the temperature difference at which switching occurred, we devised a design method for a TEG with circuit switching in order to increase power extraction with any device. We demonstrated the configuration of switching by using a system in which a TEG supplied power to an external wireless transmitter circuit. In this system, the optimal configuration differed at temperature differences of 3.0 K and 4.0 K. At a temperature difference of 3.0 K, the 2-series/1-parallel configuration provided 10% more power to the external circuit than the 1-series/2-parallel configuration. On the other hand, at the temperature difference of 4.0 K, the 1-series/2-parallel configuration provided 23% more power than the 2-series/1-parallel configuration.