Strong metal-support interactions of TiO₂ interface-loaded Pt constructed under different atmospheres for adjusting...

In this study, two series of samples (rT-Pt/TiO₂ prepared with a hydrogen pretreatment and Tr-Pt/TiO₂ prepared with an oxygen pretreatment) were prepared by treating commercial TiO₂ supports in different atmospheres to establish different TiO₂ interfacial structures, followed by the addition of platinum nanoparticles (NPs) for the catalyzed hydrogenation/dehydrogenation cycle of N-ethylcarbazole (NEC). The kinetic analysis and reaction mechanism were investigated by combining XRD, Raman, CO-DRIFT, HRTEM, XPS, H₂-TPD and DFT calculations. It was found that the performance of the samples for the NEC system's cyclic hydrogen storage could be modulated by treating the TiO₂ interfacial structure with different atmospheres varying the extent of strong metal-support interaction (SMSI). In addition, a turnover frequency (TOF) of 191.52 min^-1 for dehydrogenation was achieved at 170 °C, which is better than the previously reported catalysts. Experimental studies (characterization and kinetic studies) and DFT calculations confirmed that the SMSI of the Tr-Pt/TiO₂ series samples promoted the escape of H₂ and enhanced the catalytic activity for 4H-NEC in the 12H-NEC dehydrogenation reaction. In the NEC hydrogenation reaction, the rT-Pt/TiO₂ series samples were pretreated with H₂ before loading platinum metal, which led to the early activation of Ti⁴⁺ in their carriers, and thus suppressed the SMSI effect of the reduction process after loading platinum. This process caused the interface formed by rT-Pt/TiO₂ to have a higher energy barrier to 6H-NEC, which is an intermediate product of the NEC hydrogenation process, and this interrupted the hydrogenation process of 6H-NEC.