Related Experiment Video
Updated: Jun 14, 2025

Thermal Measurement Techniques in Analytical Microfluidic Devices
Published on: June 3, 2015
Micromachined Joule-Thomson cooling for long-time and precise thermal management
Haiyue Pei1,2, Limin Qi1,2, Yihan Lu1,2
1Zhejiang Key Laboratory of 3D Micro/Nano Fabrication and Characterization, School of Engineering, Westlake University, Hangzhou, Zhejiang 310030, China.
Abstract:
Efficient thermal management is essential for low-temperature optoelectronic devices. Traditional liquid nitrogen (LN2) cooling presents challenges such as frequent replenishment needs and limited operational duration. This study introduces micromachined Joule-Thomson (MJT) cooling as a superior alternative for temperature regulation in optoelectronic devices. We evaluated the thermal and optical performance of MJT cooling for a CdSe/ZnS quantum dot (QD) sample within a temperature range of 120-300 K. Thermal analysis showed that with a single 50 l nitrogen refill, the MJT system can operate continuously for over one week, surpassing the LN2 system by 11 times. The temperature stability was affected little by laser irradiation, with a <0.2 K rise at 5 mW of laser power. In addition, the MJT cooling led to an average blueshift of 1-3 meV in the emission peak of QDs and 0.3-2.3 meV reduced spectral broadening compared to LN2, attributed to a smaller sample-to-cold-stage temperature gap of about 8-9 K in the MJT setup. The standard deviations of peak energy and FWHM are in the order of E - 1 meV magnitude, demonstrating a comparable thermal uniformity compared to LN2. The vibration spectra obtained for both vertical and horizontal directions reveal the superior low-vibration characteristics of MJT cooling. These findings validate MJT cooling as a superior and reliable strategy for the thermal management of optoelectronics, ensuring prolonged operational durations, reliable temperature stability, enhanced temperature precision, high thermal homogeneity, and low vibrations.
More Related Videos
Related Concept Videos
Joule-Thomson Effect
This experiment forces high-pressure gas through a throttle valve or a porous plug to a lower-pressure region. The gas expands as it passes through to...
Thermal Stress
Mechanism of heat transfer
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Temperature and Thermal Equilibrium
The concept of temperature has evolved from the common concepts of hot and cold. The scientific definition of temperature explains more than just our sense of hot and cold. Temperature is operationally defined as the quantity measured with a thermometer. Furthermore, temperature is...

