Dynamic evolution of particulate and gaseous emissions for typical residential coal combustion

Residential coal combustion still accounts for half of the heating energy consumption in many developing countries. The dynamic variation during the combustion process importantly determines the combustion facility design and appropriate air quality assessment, which was omitted in conventional studies. This study investigated the emissions of particulate and gaseous pollutants during the combustion process for typical coal types using online monitoring. During the first pyrolysis stage with temperature climbing, the organic aerosols (OA) and gases reached peak concentration. The second fierce combustion stage had the highest temperature and produced the highest cumulative emissions, particularly a substantial amount of black carbon for coals with higher volatile content. Using higher-quality coals will undoubtedly reduce PM emissions, by a factor of 10 from bituminous to anthracite coal. However, more ultrafine particles (d < 0.1 μm) from cleaner coal may pose additional health risks. Anthracite and honeycomb coal had approximately twice the energy content and emitted more CO₂ per unit mass of fuel and had more persistent SO₂ emissions throughout the burnout stage. The oxygenation of OA and organic gases remained increased during combustion, suggesting the pyrolysis products underwent oxidation before being emitted. The investigation of the coal combustion process suggests the importance of reducing volatiles to control PM emissions, but the potential negative synergistic effects between PM reduction and increased carbon emissions should also be considered.