Related Experiment Video
Updated: Jun 14, 2025
Evaluation of a Novel Laser-assisted Coronary Anastomotic Connector - the Trinity Clip - in a Porcine Off-pump Bypass Model
Published on: November 24, 2014
Experimental Study on the Process and Performance of Laser-Assisted Vascular Anastomosis Based on Response Surface
Jun Huang1, Mintao Yan1, Yanyu Li1
1School of Material Science and Technology, Nanjing University of Science and Technology, Nanjing, China.
None:
The selection of an appropriate vascular anastomosis process has an important impact on the surgical treatment of coronary artery disease. In this paper, a laser-assisted vascular anastomosis process test was carried out based on the response surface experimental method, and the interaction of laser process parameters on the bursting pressure strength and thermal damage of the anastomotic incision was analyzed, and the relationship model between process parameters and anastomotic performance of the vascular incision tissues was established, and the optimal welding process parameters were obtained. The results show that the laser power has a significant effect on the bursting pressure strength of the anastomotic incision; the interaction of laser power and scanning speed has a substantial impact on the thermal damage of the anastomotic incision; and the anastomotic incision has the best comprehensive performance when the laser power is 6.2 W, the scanning speed is 206 mm/s, and the defocus is 2 mm.
