Management of Light Absorption Based on Sidewall Reflection for Fabricating High-Performance Flexible Nano-Coned...

High performance and robustness are the key factors to boosting wearable and portable applications. Although the 1D crystal structure makes the Sb₂Se₃ thin film more tolerant to physical deformation upon bending, the conventional planar structures still cannot undergo repeated mechanical bending due to the induced stress/strain inside devices, which can be well addressed by constructing three-dimensional nanostructures. Besides, the electron diffusion length has two values, 0.3 μm in the [221] direction and 1.7 μm in the [001] direction, in the Sb₂Se₃ thin film, which limits the absorber thickness, for getting an effective carrier collection; thus, a strong light trapping effect enabling sufficient light harvesting is needed to allow the use of a very thin light absorption layer. Herein, the nanoconed Sb₂Se₃ solar cells have been designed, and their light absorption behaviors were investigated within a finite-element simulation under the substrate back-reflection, indicating that the reflection of the bottom part always works positively, while the effect of the nanocone sidewall on absorption enhancement largely depends on its geometry, arising from resonant or scattering modes. These results provide a practical guide in designing/establishing an easier/simpler way to fabricate high-performance and mechanically stable flexible nanostructured Sb₂Se₃ thin film solar cells.