A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion...

Enhancing interfacial adhesion in polypropylene (PP)/recycled polyethylene terephthalate (rPET) blends is crucial for the effective mechanical recycling of these commercial plastic wastes. This study investigates the reactive extrusion of PP/rPET blends using a dual compatibilizer system comprising maleic anhydride grafted polypropylene (PP-g-MA) and various glycidyl methacrylate (GMA)-based compatibilizers. The effects of backbone structure and reactive group on the morphological, mechanical, and thermal characteristics were systematically studied. This study sheds light on the effective compatibilization mechanisms using characterization methods such as Fourier Transform Infrared Spectroscopy (FTIR) and morphological analyses (SEM). The results indicate that GMA-based compatibilizers play a bridging role between rPET and PP-g-MA, resulting in improved compatibility between the blend components. A combination of 3 phr PP-g-MA and 3 phr ethylene-methyl acrylate glycidyl methacrylate terpolymer (EMA-GMA) significantly improves interfacial adhesion, leading to synergistic enhancements of mechanical performance of the blend, up to 217% and 116% increases in elongation at break and impact strength, respectively, compared to the uncompatibilized sample. Moreover, a significant improvement in onset temperature for degradation is observed for the dual compatibilized sample, with 40 °C and 33 °C increases in onset temperature relative to the uncompatibilized and the single compatibilized samples. These findings underscore the immense potential of tailored multi-component compatibilizer systems for upgrading recycled plastic waste materials.