Related Experiment Video
Updated: Jun 13, 2025
Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver
Published on: August 21, 2018
Optimal configurations of an electromagnetic tracking system for 3D ultrasound imaging of pediatric hips - A phantom
Thanh-Tu Pham1, Lawrence H Le1, John Andersen2
1Department of Radiology and Diagnostic Imaging, University of Alberta, Edmonton, Alberta, T6G 2B7, Canada; Department of Biomedical Engineering, University of Alberta, Edmonton, Alberta, T6G 2V2, Canada.
Abstract:
Tracking the position and orientation of a two-dimensional (2D) ultrasound scanner to reconstruct a 3D volume is common, and its accuracy is important. In this study, a specific miniaturized electromagnetic (EM) tracking system was selected and integrated with a 2D ultrasound scanner, which was aimed to capture hip displacement in children with cerebral palsy. The objective of this study was to determine the optimum configuration, including the distance between the EM source and sensor, to provide maximum accuracy. The scanning volume was aimed to be 320 mm × 320 mm × 76 mm. The accuracy of the EM tracking was evaluated by comparing its tracking with those from a motion capture camera system. A static experiment showed that a warm-up time of 20 min was needed. The EM system provided the highest precision of 0.07 mm and 0.01° when the distance between the EM source and sensor was 0.65 m. Within the testing volume, the maximum position and rotational errors were 2.31 mm and 1.48°, respectively. The maximum error of measuring hip displacement on the 3D hip phantom study was 4 %. Based on the test results, the tested EM system was suitable for 3D ultrasound imaging of pediatric hips to assess hip displacement when optimal configuration was used.
