Cross-step detection using center-of-pressure based algorithm for real-time applications

Matjaž Zadravec1, Zlatko Matjačić2

  • 1University Rehabilitation Institute Republic of Slovenia, Linhartova 51, SI-1000, Ljubljana, Slovenia. matjaz.zadravec@ir-rs.si.

Abstract

Related Concept Videos

Finding the Center of Gravity01:03

Finding the Center of Gravity

The center of gravity of a body is an imaginary point where the body's total weight is assumed to be concentrated, and the body is perfectly balanced. The center of the mass of a body is a point at which the whole of the mass of the body appears to be concentrated. If the acceleration due to gravity, g, has the same value at all points on a body, its center of gravity is identical to its center of mass. The center of gravity of homogeneous bodies such as a sphere, cube, or rectangular plate...
3.4K
Relative Motion Analysis using Rotating Axes-Problem Solving01:29

Relative Motion Analysis using Rotating Axes-Problem Solving

Consider a crane whose telescopic boom rotates with an angular velocity of 0.04 rad/s and angular acceleration of 0.02 rad/s2. Along with the rotation, the boom also extends linearly with a uniform speed of 5 m/s. The extension of the boom is measured at point D, which is measured with respect to the fixed point C on the other end of the boom. For the given instant, the distance between points C and D is 60 meters.
Here, in order to determine the magnitude of velocity and acceleration for point...
394
Relative Motion Analysis using Rotating Axes01:25

Relative Motion Analysis using Rotating Axes

Consider a component AB undergoing a linear motion. Along with a linear motion, point B also rotates around point A. To comprehend this complex movement, position vectors for both points A and B are established using a stationary reference frame.
However, to express the relative position of point B relative to point A, an additional frame of reference, denoted as x'y', is necessary. This additional frame not only translates but also rotates relative to the fixed frame, making it...
450
Relative Motion Analysis using Rotating Axes - Acceleration01:22

Relative Motion Analysis using Rotating Axes - Acceleration

Consider a component AB undergoing a linear motion. Along with a linear motion, point B also rotates around point A. To comprehend this complex movement, position vectors for both points A and B are established using a stationary reference frame. The absolute velocity of point B is determined by adding the absolute velocity of point A, the relative velocity of point B in the rotating frame, and the effects caused by the angular velocity within the rotating frame.
Time differentiation is...
327
Relative Motion Analysis - Acceleration01:10

Relative Motion Analysis - Acceleration

A slider-crank mechanism converts rotational motion from the crank into linear motion of the slider or vice versa. This mechanism consists of three main parts: the crank, the connecting rod, and the slider. The movement of the slider-crank is an example of general plane motion as the fluctuating angle between the crank and the connecting rod. Consider a segment AB where point A is at the end of the slider and point B is on the diametrically opposite end to point A, on a crack. The variance in...
343
Center of Mass: Introduction01:03

Center of Mass: Introduction

Any object that obeys Newton's second law of motion is made up of a large number of infinitesimally small particles. Objects in motion can be as simple as atoms or as complex as gymnasts performing in the Olympics. The motion of such objects is described about a point called the center of mass of the object. The center of mass of an object is a point that acts as if the whole mass is concentrated at that point. The center of mass of an object with a large number of infinitesimally small...
14.0K