Rapid wideband characterization of viscoelastic material properties by Bessel function-based time harmonic ultrasound...

Elastography is an emerging diagnostic technique that uses conventional imaging modalities such as sonography or magnetic resonance imaging to quantify tissue stiffness. However, different elastography methods provide different stiffness values, which require calibration using well-characterized phantoms or tissue samples. A comprehensive, fast, and cost-effective elastography technique for phantoms or tissue samples is still lacking. Therefore, we propose ultrasound Bessel-fit-based time harmonic elastography (B-THE) as a novel tool to provide rapid feedback on stiffness-related shear wave speed (SWS) and viscosity-related wave penetration rate (PR) over a wide range of harmonic vibration frequencies. The method relies on external induction and B-mode capture of cylindrical shear waves that satisfy the Bessel wave equation for efficient fit-based parameter recovery. B-THE was demonstrated in polyacrylamide phantoms in the frequency range of 20-200 Hz and was cross-validated by magnetic resonance elastography (MRE) using clinical 3-T MRI and compact 0.5-T tabletop MRI scanners. Frequency-independent material parameters were derived from rheological models and validated by numerical simulations. B-THE quantified frequency-resolved SWS and PR 13 to 176 times faster than more expensive clinical MRE and tabletop MRE and have a good accuracy (relative deviation to reference: 6 %, 10 % and 4 % respectively). Simulations of liver-mimicking material phantoms showed that a simultaneous fit of SWS and PR based on the fractional Maxwell rheological model outperformed a fit on PR solely. B-THE provides a comprehensive and fast elastography technique for the quantitative characterization of the viscoelastic behavior of soft tissue mimicking materials.