Dioxin concentrations and congener distribution in biomass ash from small to large scale biomass combustion plants

Biomass plays a pivotal role in global energy production, with a significant share allocated for industrial heat and power generation. The combustion of biomass generates biomass ash, which is widely utilized as a fertiliser. However, concerns arise regarding the presence of dioxins in biomass ash, which may limit its continued use. Dioxins are toxic compounds listed under the Stockholm Convention due to their persistence and detrimental effects on human health and the environment. This study investigates the dioxin content in biomass ashes produced in various combustion plants with a capacity of 1-50MWth in Estonia, where biomass is widely used for heating and power production. The research encompassed samples from nine biomass combustion plants with varying technical parameters considering both bottom and fly ash. Dioxin concentrations were determined for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like PCBs (PCBs). The results indicate that dioxin TEQ content in all samples was well below the European Union's (EU) POP Regulation limit of 5 µg TEQ/kg, with most values being at least tenfold lower. However, some samples failed to meet the EU Fertilising Products Regulation's threshold of 20 ng TEQ/kg. Notably, fly ash exhibited higher dioxin concentrations than bottom ash. While PCBs were in significant concentrations, PCDDs dominated the overall dioxin TEQ content. This study provides essential insights into the dioxin content in biomass ash and its correlation with current EU regulatory limits. It also highlights the complex distribution of dioxin congeners, particularly PCBs, within biomass ash, emphasizing the continued research's importance.