Techniques and Instruments for Assessing and Reducing Risk of Exposure to Nanomaterials in Construction, Focusing on...

The paper explains how nano exposure is assessed in the construction field and focuses on the production of fire-resistant insulation panels with nanoclay. Utilizing the commercial ANSYS CFX^® software, a preliminary theoretical simulation was conducted on nano exposure in the workplace, which revealed that particle dispersion is primarily driven by diffusion. Panel post-processing through drilling results in the highest inhalation exposure, followed by mixing and grinding activities. Compared to a state of 'no activity', each activity resulted in an exposure increase by a factor of min. 1000. An overall assessment suggests that the use of nanoparticles in construction materials may not significantly heighten workers' exposure to nanopowders when considering particle concentration alone as opposed to using traditional micro-scale materials. However, the issue persists when it comes to blending powders or performing finishing tasks on panels, with concentration levels being significantly higher for drilling, grinding, and mixing powders at 2.4 times above the standard reference value (40,000 particles/cm³); this is unacceptable, even for brief durations. Examination of dermal contact with gloves and masks worn by workers revealed no nanoparticle penetration. Safety measures were proposed for workers based on decision trees to enhance their safety. Ten categories of protection strategies have been devised to combat the impact of nanoparticles, which are tailored to specific technical situations, but they must be modified for various types of nanoparticles despite potential shared health implications.