Fibrous catalyst based on atomic Pd and N-doped holey graphene functionalized cotton fiber for continuous-flow
Shuaihu Du1, Sufeng Cao2, Wei Chen1
1School of Chemistry and Environmental Engineering, Key Laboratory of Green Chemical Engineering Process of Ministry of Education, Engineering Research Center of Phosphorus Resources Development and Utilization of Ministry of Education, Hubei Key Laboratory of Novel Reactor and Green Chemical Technology, Wuhan Institute of Technology, Wuhan 430205, China.
Abstract:
Continuous-flow catalysis bridges the gap between bench-scale laboratories and production-scale factories and thus should be a green and promising technology for the manufacture of value-added chemicals. Here, we present the construction of a continuous-flow catalytic system by integrating a tubular reactor with novel catalytic fibers, which are comprised of single-atomic Pd (Pd1) and nitrogen-doped holey graphene (NHG) functionalized cotton fibers (CFs). Due to the loosely packed structure, highly exposed dual-active sites (i.e., single-atomic PdN4 sites and activated C sites in the NHG carbocatalyst) of the CF@(Pd1/NHG) catalytic fibers, the corresponding flowing system exhibites remarkably high catalytic performance (activity and durability) and processing rate in organic reactions, including oxidative hydroxylation of phenylboronic acid and reduction of nitroarenes. Typically, the processing rate of the catalytic system toward 4-nitrophenol (a representative nitroarene) reduction can reach up to 2.46 × 10-3 mmol·mg-1·min-1, significantly higher than that of those packing catalysts reported in recent years.
