Oil Sorption Properties of Centrifugally Spun Polyisobutylene-Based Thermoplastic Elastomer Microfibers

Fiber-based sorbent materials are an essential part of containing oil spills, thus preventing ecological damage. Poly(styrene-b-isobutylene-b-styrene) thermoplastic elastomer fibers were successfully produced by centrifugal spinning. Scanning electron microscopy revealed that the fibers were bead free and smooth-surfaced, with an average fiber diameter of 5.9 ± 2.3 μm. Contact angle measurements proved the highly hydrophobic (water contact angle of 126.8 ± 6.4°) and highly oleophilic nature of the fiber mat. The sorption and retention capacities of the fiber mat were tested for various oils and benchmarked against polypropylene as the industry standard and polystyrene, which is widely used in the literature. The oil uptake of the fiber mat showed a strong correlation with the viscosity of the oil, resulting in sorption capacities of 10.1 ± 0.8 g/g for sunflower oil, 19.9 ± 2.1 g/g for motor oil, and 23.8 ± 1.8 g/g for gear oil. Oil-water separation tests were also conducted, resulting in ~100% oil removal. The thermoplastic elastomer fiber mat outperformed the industry standard; however, the polystyrene fiber mat demonstrated the best oil sorption performance.