Liquid-liquid extraction of selenium (IV) ions from hydrochloric acid solution using Aliquat 336 dissolved in...

Solvent extraction of selenium(IV) ions from highly concentrated hydrochloric acid using 0.4 mol/L Aliquat 336 dissolved in kerosene was investigated. As a modifying agent, 1-octanol (10% v/v) was added to the organic phase to avoid the third phase formation. The effect of different parameters affecting the liquid-liquid extraction of selenium(IV) such as the acid concentration, shaking time, metal ion concentration in the aqueous phase, loading capacity, diluents, and temperature, was studied. The results indicate that selenium(IV) is extracted efficiently by 0.4 mol/L Aliquat 336 dissolved in kerosene. It was noticed that the extraction increased with the increase in the acid and Aliquat 336 concentrations, reaching an extraction percentage of about 92% at 8 mol/L HCl and 97.1% at 1 mol/L extractant. The extracted organic species is postulated to be [H₂SeO₂Cl₂.2R₄NCl]_org by using the slope analysis method, and the value of K_ex for selenium(IV) extraction was found to be 26.17 ± 2 M^- 2. The structure of the extracted organic species was confirmed by FT-IR. The effect of diluents using various aliphatic and aromatic diluents indicated that kerosene is the most preferred diluent. This is owing to safety ground purpose, economic consideration, the lower cost, availability, and lower toxicity. Thermodynamic parameters indicate the endothermic nature for the solvent extraction of selenium(IV) for the investigated system according to the positive value obtained of the enthalpy change (ΔH). Depending on the obtained results, the method was used to recover selenium(IV) from a simulated solution synthesized in hydrochloric acid medium, which is expected in anode slime leach liquor solution.