Removal of persistent and mobile organic micropollutants from drinking water utilizing a synthesized waste-derived...

Persistent and mobile (PM) substances refer to a wide range of organic micropollutants (OMPs) with high persistence and mobility in water. So far, only a few methods have been explored for the removal of PM substances from drinking water. In this work, a new adsorbent based on spent coffee grounds and aluminum waste was synthesized and utilized to remove 25 OMPs, including 22 PM substances, from drinking water. Different characterization methods, including powder X-ray diffraction (XRD), analyses according to Brunauer-Emmett-Teller (BET), field-emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDS), were applied to describe the adsorbent's textural and structural characteristics. The results revealed that the adsorbent is highly effective in removing OMPs. Common OMPs (i.e. carbamazepine, sulfamethoxazole and diclofenac) were completely removed from drinking water. Also, many of the PM substances were removed by more than 80% using an adsorbent dosage of 0.1 g/L. A strong relation between abatement of ultraviolet light absorbance at 254 nm (UV₂₅₄) and OMP removal was observed. Therefore, UV₂₅₄ abatement is a useful surrogate for a quick estimation of OMP removals.